PE 1620 SA Extra PE 1620 SA Elite II SA 1620 SL Extra PE 1620 SL Action PE 1620 SAL Extra
PE 1620 SAL Elite PE 2100S SA 1620S Hand Fed SA 2100S Hand Fed Videos

PE1620SA-Extra automatic platen die cutting machine

PE1620SAEXTRA

Performance Specifications:

Maximum paper size : 1620 × 1200mm
Minimum paper size : 650 × 450mm
Max.die cutting range : 1600 × 1180mm
Range of the applicable paper : E , B , C , A , and AB corrugated cardboard (thickness to 8.5mm )
Most waste edge width : 12mm ( arrangement, as the die-cut  products, paper factors and operational factors may be)
Smallest bite paper width : 6 to 12mm
Knife line : 23.8mm
The maximum mechanical speed : 5000 times / hour
Cutting pressure : 400 tons
Total the electricity Power : 35KW
Pressure adjustment range : ± 1.5mm
Overall dimensions : 9980 × 5670 × 2480mm
(length × width × height)
(including stepping Taiwan)
Net weight : 32 tons
Machine Gross Weight : 39.5 tons
Net weight : 25 tons

PE 1620SA EXTRA (Timing Belt Main Drive)

Specifications:

 Maximum Sheet Size  : 1620 x 1200 mm
 Minimum Sheet Size : 650 x 450 mm
 Maximum Cutting Size  : 4500 cycles/hour
 Maximum Mechanical Spee  : 4500 cycles/hour
Maximum Cutting Pressure : 400 tons
Stock Range : E, B,C,A and AB flute corrugated board (1~8.5mm)
Minimum Gripper Margin : 6-12 mm
Minimum Gripper Waste : 12 mm (Distance from first knife to paper edge)
Cutting Rule Height : 23.8 mm
Total Power Required : 35 KW
Main Motor Power : 22 KW
Electrical Power : 380V, 50HZ, 3-phase
Air Pump Displacement : 0.7m3/min
Mobile Lower Platen
Adjusting Range
: ±1.5mm
Net Weight of Machine : 32 tons
Gross Weight of Machine : 39.5 tons
Machine Dimensions : 9980(L) x 5670(W) x 2480(H)mm (incl. Catwalk)

The Machine is complete with:

Feeder (Maxcut lead edge feeder)

• New up graded, same as Maxcut lead edge feeder, more accurate and positive feeding
• Rare jogger at feeder to prepare for the possible future in line operation with prefeeder (optional)
• Pneumatic side push guide plates (left and right sides)
• Left and right side guides, individually position adjustable and register side at choice per box layout
• High vacuum blower with silencer and valving system

Die Cutting Section

• Crank and worm gear, toggle drive system for the lower platen
• The mobile platen stroke is increased from 71mm to 95mm for handling corrugated board (especially AB Flute) smoother
• Stationary high precision upper platen
• Safety door and diechase safety locking system
• High torque pneumatic clutch/break for positive clutch on and reliable breaking, and special air inlet system to control the air volume for smooth machine start and stop
• Air cushion underneath the cutting plate for easy cutting plate in and out
• Reinforced timing belt main drive system with synchronization detector
• Overloading protection torque limit clutch
• State-of-the-art 3 cam index gripper chain drive
• Center line system compatible to Center Line II, makes the cutting die and stripping die centered quickly
• 8 high quality precision alloy gripper bars, each with 12 special hardened grippers to ensure firm grab of the sheet at high speed
• Sheet arrival and departure check photo sensor
• Left and right front lay locking blocks, separating and synchronizing adjustment available
• Chain guide rail use VL compound to improve abrasive resistance and seismic resistance
• Self-diagnostic trouble display
• Digital speed display
• Automatic recycling lubrication system with oil pressure gauge and oil pressure switch
• Automatic main gripper drive chain lubrication

Stripping Section

• Centerline system (compatible to Centerline II)
• 400mm upper stripping frame raiser enhances greatly the operation space, more operator friendly
• Motorized upper frame suspending hoister
• Lead edge waste removal system
• Centerline system for quick stripping die set up

Delivery

• Escalator delivery fork with non-stop air cylinder for neat and positive delivery and conveyor belt delivery table to protect the sheets from scratches
• Bundle delivery with pre-set counter requesting only one sheet interval in non-stop operation at 4500S/H production speed
• The bundle delivery table can be prepared for future connection with breaker for in line operation (to be required at order)
• Full stripping with/without lead edge waste stripping convertible by one button, no tool change, more operator friendly and safe operation
• Spring loaded adjustable chain tension back buffering wheel to maintain the chain tension constant and smooth gripper bar movement

Electricals

• PLC system to control machine running and trouble surveillance
• CE standard electrical components and circuit
• PLC remote controlling system (Optional)

Standard Accessories

• One platform
• One 7mm hardened (HRC45) cutting plate
• One die chase
• One spare gripper bar
• One set of tools (metric)

Important

• 1 Year Warranty
• Local installation and training from factory trained engineers