1620 SA Extra PE 1620 SA Elite II SA 1620 SL Extra PE 1620 SL Action PE 1620 SAL Extra
PE 1620 SAL Elite PE 2100S SA 1620S Hand Fed SA 2100S Hand Fed Videos

Commodity and Specifications:

One Set Only ETERNA
Semi-Automatic Flatbed Diecutting and Creasing Machine
with Stripping Station
Model: SA 2100S



Maximum Sheet Size : 2100 x 1300mm
Minimum Sheet Size : 850 x 600mm
Maximum Cutting Size : 2080 x 1280mm
Inner Chase Size : 2110 x 1330mm
Maximum Mechanical Speed : 3500cycles/hour
Maximum Cutting Pressure : 500tons
Stock Range : E, B,C,A and AB flute corrugated board
Manual Feeding Mechanical Speed : 2000-3000cycles/hour
Cutting Rule Height : 23.8mm
Minimum Gripper Margin
(Distance from first knife to paper edge)
: 15mm
Total Power Required : 38KW
Variable Speed Main Motor Power : 30KW
Air Pump Displacement : 0.35m3/min
Electrical Power : 380V, 50Hz, 3-phase
Mobile Lower Platen Adjusting Range : ±1.5mm
Net Weight of Machine : 43.5tons
Machine Dimensions : 6920(L) x 6800(W) x 2730(H)mm

The Machine is complete with:

• FEEDER (Hand Feeder)
• Side guide to position the pile center
• Feeding lift pallet

Diecutting Section

• Crank and worm gear, toggle drive system for the lower platen
• Stationary high precision upper platen
• Safety door and diechase safety locking system
• High torque pneumatic clutch/break for positive clutch on and reliable breaking
• Cutting pressure fine adjustment wheel with position indicate gauge
• Overloading protection torque limit clutch
• State-of-the-art 3 cam index gripper chain drive
• Center line system compatible to Center Line II, makes the cutting die and stripping die centered quickly
• 7 pieces of gripper bar each with 24 spikes
• Sheet arrival and departure check photo sensor
• Left and right front lay locking blocks, separating and synchronizing adjustment available
• Self-diagnostic trouble display
• Digital speed display
• Automatic recycling lubrication system with oil pressure gauge and oil pressure switch
• Automatic main gripper drive chain lubrication

Stripping Section

• Centerline system (compatible to centerline II)
• Motorized upper frame suspending hoister
• Lead edge waste removal system
• Centerline system with quick lock pin on upper frame


• High pile delivery system with auto pile lifter
• Electronic batch counter
• Spring loaded adjustable chain tension back buffering wheel to maintain the chain tension constant and smooth gripper bar movement


• PLC system to control machine running and trouble surveillance
• CE standard electrical components and circuit

Standard Accessories

•  One platform
•  One 7mm hardened (HRC45) cutting plate
•  One die chase
•  One spare gripper bar
•  One set of tools (metric)


• 1 Year Warranty
• Local installation and training from factory trained engineers