1050E / 1050SE / 1050SEH / 1060E / 1060E Video / 1060ER Blanker / 1060ER Blanker Video

Commodity and Specifications:

One Set Only BRAUSSE Automatic Diecutting and Creasing Machine
With Stripping Device

Model: 1060E

1060E

Specifications:

Maximum Sheet Size : 1060×760 mm
Minimum Sheet Size : 400×350 mm
Maximum Cutting Size : 1060×745 mm
Inner Chase Size : 1080×770 mm
Stock Range
– Paper (depending on quality), min. : 90 g/m2
– Board (depending on quality), up to (*) : 1000 g/m2
– Corrugated Board, up to (*) : 4 mm
(*) Carton acceptable wrap: 2% of the width wise sheet
Minimum Gripper Margin : 9~17 mm
Cutting Rule Height : 23.8 mm
Minimum Width of Double Cuts : 5 mm
Maximum Mechanical Speed : 8000 cycles/hour (subject to working environment, sheet quality and operation skills, etc.)
Designed Maximum Mechanical Speed : 7500 cycles/hour
Maximum Cutting Pressure : 260 tons
Maximum Pile Height at Feeder – Normal Mode : 1800 mm
Maximum Pile Height at Feeder – Non-stop Mode : 1520 mm
Maximum Pile Height at Delivery : 1550 mm
Total Power Required : 23 kw
Main Motor Power : 15 kw
Net Weight of Machine : 20000 kg
Gross Weight of Machine : 23000kg
Machine Dimensions : 7420 (L)x4520 (W)x2640 (H) mm (incl. Catwalk)

The Machine is complete with:

Feeder

• Three pick up and four forward suck heads with angle adjustment to handle different kinds of materials
• Preloading device with rail cart and scaled gate
• Manually side adjustment of pallet table (+/- 40 mm)
• Non-stop feeder with automatic pile lift
• Side blowers adjustable according to sheet size for smooth feeding, especially for smooth thin paper transport

Feed Table

• Sheet slow down device of feeder belts to assure accurate position of the sheet to the front lays (electro-pneumatically adjustable)
• Synchronizing device to adjust the sheet positioning to the front lay by hand during production
• Covered with an anti-static stainless steel plate
• Feed table inlet equipped with lateral ramps
• Four individually adjustable front lays at the operation side of the machine
• Ultra sonic double sheet detector (without contact)
• Sheet hold-down device (guiding the sheets to the front lays)
• Upper frame with manual lifting device
• Pull and push convertible side lays ( OS and OOS ) with photo sensor sheet arrival control

Diecutting Section

• Precision worm gear crank toggle driving system to ensure smooth and dynamic lower platen movement
• Short stroke movable platen, driven by eccentric worm gear and toggle mechanism allows large motion angle hence minimum number and size of nicks at reasonable max. production speed
• Precision stationery upper platen
• State-of-art 3 cam index gripper bar drive system to ensure smooth and precise gripper bar intermittent movement
• Pneumatic clutch/brake for main drive system
• Motorized cutting force setting by push button
• Digital strain gauge die cutting pressure tonnage display at HMI with adjustable pressure limit protection
• Seven high precision alloy gripper bar
• High quality pre-stretched gripper bar drive chain
• Torque limit safety clutch to protect the index drive system in case of gripper bar crash
• Double cam driven gripper opener and front lay swing frame without position restore spring for smooth and accurate sheet register and take off
• Pneumatic push button die chase locking mechanism to ensure safe and operator friendly changing of the die
• 5mm hardened cutting plate or 4+1mm sandwich plate (optional) on top of 15mm precision synthetic supporting plate with +/-0.9mm micro adjustment for quick set up and make ready
• Automatic main chain greasing system

Stripping Section

• Complete set of stripping tools with upper and lower stripping pins
• Centre line system for quick stripping die set up
• Integrated Quick Locking System Automatic quick locking device for the upper tool integrated in the machine
• Funnel for waste guidance
• Most efficient and smooth cam running curve drives the stripping tooling with large motion angle to ensure clean and tiny stripping at speed
• Pneumatic quick lifting device for upper frame

Delivery Section

• Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange
• Five section brush brake each section angle adjustable individually
• Air blower to press down the sheets
• Rare and side joggers with easy position adjustment
• Safety device to prevent the steel pile plate from clamping on the foot when it reaches at ground level

General

• Platform with safety barrier
• Complete lost sheets control throughout the entire machine
• Internet modem for online assistance by problems with electronics
• CE certified
• Emergency stop at arm length

Tooling

• One upper chase with quick locking (106ERZ034)
• One 5mm hardened cutting plate (B106B0438)
• One lower stripping pull-out frame
• One set of stripping tools, including crossbars, pins and supports

Foundations

Independent of the fact whether the machine is placed on ground level or above a cellar, or on a floor, the own oscillation of the carrying floor, including the weight of the machine, must be over 25 Hz. Only a structural engineer is capable to judge whether the floor is in accordance with the needed values, as stated in our floor plan. Only he can be responsible for this.

Important

• 1 Year Warranty
• Side chase loader
• Extra die chase with centre line and quick locking system
• Local installation and training from factory trained engineers