Solid Board TA 550 C3 TA 650 C3 TA 900 C TA 900 C3 II / C4 + C6II TA1100 C3 II
Solid Board & Corrugated TB 1100 C3 II TB 1350 C3 TB 1450 C3
Corrugated TC 1700 C3 TC 2100 C3 TC 3200 C3

Folder Gluer Brausse TB1100 C

Brausse TB1100_product_info_ENG---Copy-copy

Specifications:

Power / Air:  

• Power voltage 400 V / 50 Hz
• Power supply for main motor 22 kW
• Power supply for additional motors 2, 2 kW
• Total power supply 30 kVa
• Air supply / consumption 6 bar / 700 l pro Min
• The compressed air quality must be according to ISO 8573/1:
• Filtration on solid parts Class 4
• Filtration on oil Class 4
• Dry air Class 4

General specifications:  

• Material solid board up to 800 g/m2
• Corrugated up to A-Flute
• Trombone section max. belt speed 425 m/min
• Max. belt speed: 325 m/min
• Overall length 12740 mm
• Overall height 2000 mm
• Overall width 1750 mm
• Total net weight 8 t

Folder-gluer-Brausse-TA1100-straight

 

Straight line:  

A 145 -1100 mm
B  120 -1100 mm with small box device
C 55-1100 mm
D 60 – 540 mm
E minimum 8 mm

 

 

 

 

 

Folder-gluer-Brausse-TA1100-lock

Lock bottom:  

A 185 -1075 mm
B 150 -900 mm
C minimum 57 mm
D minimum 30 mm
E minimum 70 mm
F minimum   30 mm

 

 

 

• Changes in construction preserved
• The machine Brausse TB1100 is delivered with the European CE certificate.

Highlights of all Brausse machines:

• All electrical components are from self-brand names such as Omron and Telemechanique
• All PLC controls are from Mitsubishi
• All operating software in the local language

Feeder section:

• Adjustable separate tension on each belt
• Eight individually adjustable feed belts with quick adjustment system
• Cleaning brushes for the feeder belts
• Feeder start/stop can be controlled at all operator stations
• Two standard feed gates (30 mm wide) and one supporting feed gates (30 mm wide) for long, small boxes
• One lever-feeding gauge lifting mechanism to make easy feed belt adjustments
• Feeder belts adjustment can be done by one hand movement
• Short and long carriers for transport in the pre-breaker
• Four adjustable side plates
• Vibration system in feeder

Pre-breaking system:

• Belt pre-brake system on the right side
• Guide pre-brake system on the left side
• Belt pre-brake system on the left side (standard on 4 and 6 corner option)
• Guide pre-brake system on the right side (standard on 4 and 6 corner options)
• Three carriers with split upper carriers in pre-breaking section. This allows special compound folds such as interior, Z folds (pre-breaking sword can be put at the left side only)
• Manual carrier-positioning system throughout the machine (for both carrier and upper belts)
• Top carriers have reinforced tops throughout for mounting accessories, which are single pin wrench adjustments
• Three upper and lower belt carriers

Gluing system:

• Upper gluing wheel for lock bottom (5,2mm)
• Lower gluing wheel system (3, 2 mm)
• Left and right lower gluing system

Folding section:

• Three belt carriers
• Speed adjustment for left and right fold belt
• Entrance of the upper belt carrier adjustable in height
• Top belt can be lifted

Heavy duty double frame trombone section:

• Batch counter and kicker
• Jam detector

Compression section:

• Two operation modes for compressing the folded boxes:
1. Auto – belt speed depending on machine speed: box flow without spacing
2. Manual – belt runs at a constant speed
• Additional press belt for extra compression for crash lock boxes

General:

• One pin wrench adjustment operation throughout the machine, operator friendly
• All the adjustment can be made without any tools
• Digital positioning gauge
• Upper belt width 20 mm, lower belt width 25 mm on the pre-break & gluing section
• Upper belt width 16 mm, lower belt width 20 mm on the folding section
• Electronic batch counter and kicker
• Electronic remote control
• Easy one-hand carrier position adjustment
• Belt speed detecting encoder on the belt drive shaft

Important:

• 1 years warranty
• 5 days training for operating personnel included
• Local installation and training from factory trained engineers