1050 SFI 1050 SEF 1050 FH 1050 FCI

Die Cutting and Creasing Machine with Hot Foil Stamping Unit 1050SEF

Functions & Features:

• Die cutting
• Creasing
• Heated embossing
• No stripping
• Hot foil stamping
• Removable foil pulling system
• Free standing foil rewinder with 6 tension axels

Brausse 1050SEF_product_info_ENGSpecifications:

Power / Air:  

• Power voltage 400 V / 50 Hz
• Power supply for main motor 11 kW
• Power supply for additional motors 9 kW
• Power supply for heating 24 kW
• Power supply for additional motors & drives 16 kW
• Total power supply including heating 60 kW
• Air supply / consumption 6 bar / 1200 l pro Min
• The compressed air quality must be according to ISO 8573/1:
• Filtration on solid parts Class 4\
• Filtration on oil Class 4
• Dry air Class 4

General specifications:  

• Pile height feeder, maximum 1530 mm (incl. Palette)
• Pile height feeder with non-stop operation, maximum 1130 mm (incl. Palette)
• Pile height delivery, maximum 1300 mm (incl. Palette)
• Pile height over non-stop curtain, maximum 80 mm
• Total length (incl. preloading rails) 7060 mm
• Total width (incl. operation platform) 4730-5530 mm
• Total height 2225 mm
• Total net weight 17 t

Specifications material: 

• Maximum sheet size 1050 x 750 mm
• Minimum sheet size 400 x 360 mm

Processable materials:  

• Paper (depending on quality), min 80-90 g/m²
• Carton (depending on quality), up to (*) 1600 g/m²
• Corrugated board (fine), up to (*) 4 mm
• Plastic materials, like PP, PE 0, 6 mm
• (*) admissible undulation: 4% of the sheet width
• Minimal gripper edge 9, 5 mm

Specifications for die cutting:  

• Maximum die cutting size 1040 x 720 mm
• Inner size of chase 1080 x 745 mm
• Dimensions die cutting plate 1080 x 736 mm
• Maximum die cutting pressure 300 t
• Maximum mechanical speed 7500 Cycles/h
• Specifications for hot foil stamping unit:
• Foil advancing shaft 2 (3rd as optional)
• Maximum capacity foil diameter Ø 200 mm (shaft 2)
• Ø 240 mm (shaft 1 and 3)
• Foil core diameter 1″ or 3″
• Number of rewind shafts 6
• Number of dancing rollers 6
• Maximum rewinding diameter Ø 400 mm
• Maximum foil and stamping size 730 x 1020 mm
• Maximum foil stamping speed (subject to paper, foil and stamping die quality as well as operator’s skill)
• Foil pull length = 200 mm Foil width = 100 mm 6000 sheets/h
• Foil pull length = 300 mm Foil width = 100 mm 5000 sheets/h
• Foil pull length = 600 mm Foil width = 150 mm 4000 sheets/h
• Foil pull length 600-700 mm Foil width = 150 mm 3500 sheets/h
• The max. mechanical speed 7500 cycles/h
• Register tolerance in running and cross direction  0, 2 mm
• Minimum foil width 45 mm
• Number of heated zones 12
• Temperature range 0-200°C
• Power for heating 24 kW

• The machine Brausse 1050SEF is delivered with the European safety certificate CE.
• Specifications are subject to change without notice

Highlights of all brausse machines:

• Extremely smoothly running due to the unique index box drive of the main chain
• All electrical components are from self-brand names such as Omron and Siemen
• All PLC controls are from Mitsubishi
• Foil unwinding and advancing system are driven and controlled by high tech Mitsubishi or Bosch Rexroth servo motor and driver
• All operating software in the local language
• This machine can be operated as a hot foil stamping machine and as normal die cutting and creasing machine

Standard equipment


• Suction head with several adjustment possibilities to handle different kind of materials
• Patent turbo spiral air blower pressing foot at feeder head
• Four pick up and four forward suck heads with angle adjustment
• Motorized side adjustment of pallet table.
• Pile adjustment during production
• Electrical double sheet control
• Fine air blast at lead edge for smooth thin paper transport
• Sheet slow down device of feeder belts to assure accurate position of the sheet to the front lays (electro-pneumatically adjustable)
• Synchronizing device to adjust the sheet positioning to the front lay by hand during production
• Bullet catcher on the feeder entrance
• Side lays on both sides adjustable for push and pull and for paper and carton
• Electronic side laid controls
• Four individually adjustable front lays with dial read out at the operation side of the machine
• Four electronic front lay controls by means of Omron Glasfiber Optic, adjustable two by two
• Front mark control with adjustable density
• Blowing device for continuous cleaning of the fiber optic heads of the front marks
• Photo sensor safety barrier at pallet table floor level touching point

Die section:

• Precision worm gear crank toggle driving system to ensure smooth and dynamic lower platen movement
• Precision stationery upper platen
• Pneumatic push button die chase locking mechanism to ensure safe and operator friendly changing of the die
• Pneumatic clutch/brake for main drive system
• Motorized pressure control (by servo motor)
• Digital die cutting pressure tonnage display with adjustable pressure limit protection
• Seven high precision alloy gripper bar
• High quality pre-stretched gripper bar drive chain
• State-of-art 3 cam index gripper bar drive system to ensure smooth and precise gripper bar intermittent movement
• Torque limit safety clutch to protect the index drive system in case of gripper bar crash
• Double cam driven gripper opener and front lay swing frame for smooth and accurate sheet register
• Air blasting nozzle bar for stretching the thin paper before die cutting

Delivery section:

• Automatic delivery with nonstop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange
• Five section brush brake – brake force individually adjustable
• Adjustable air blow bars to slow down the sheets
• Rear and side joggers with easy position adjustment
• Tape inserter with counter
• Photo sensor safety barrier at pallet table floor level touching point

Standard accessories:

• One operation platform
• One 5 mm hardened die cutting plate (HRC 45)
• One sandwich plate (one 3, 5 mm base plate plus one 1, 5 mm thin plate – hardened HRC 45)
• One honey comb
• One die chase with quick locking system
• One set of stamping die locking toggle
• One trolley with rails for loading and removing the foil unwinding unit

Hot foil stamping unit:

• Two servo motor driven foil advancing shafts each individually programmable for short and long foil stepping (optional 3)
• 99 programmable short pull per shaft
• Free standing operation console with industrial pc, touch screen for foil advancing step setting and 12 temperature controllers for the heating with pre-heating timer
• Calculation program for optimal foil consumption
• Automatic temperature lowering system (adjustable pro zone)
• Device for easy foil leading trough the machine
• Free standing waste foil rewinder with 6 torque motor driven rewinding shafts and 6 dancers for persistent tension control
• 45o turning bars for transporting the rest foil out of the machine
• Foil splitting blade for cutting the rest foil into several strokes
• Foil break detection at the platen entrance
• Automatic foil consume registration system with “end of foil” warning system
• Oil cooled foil tension shaft for optimal foil web control
• Thin paper stretching air blower with adjustment of air volume, strength per zone and start and stop timing
• Foil separating system with adjustment of air volume, strength per zone and start and stop timing


• Each gripper bar can be individually shimmed to ensure very accurate and smooth sheet transport in case of uneven chain stretching after years of production
• Gripper bar locking levers can be adjusted by micro adjustment screws
• Alloy gripper bars with a hard chrome surface made by special process
• Automatic main chain greasing system
• Radiator cooling for recycling toggle drive lubrication system
• Catwalk with safety rail
• Drawer for spare parts
• Complete lost sheets control throughout the entire machine
• Self-diagnostic system with indication on a colour LCD screen
• Modem with telephone connection for online assistance by problems with electronics (customer has to take care for a dedicated telephone line)
• CE certified
• CE standard safety systems for safe operation
• Emergency stop at arm length
• Centre line system
• Machine is standard elevated 200 mm


• 2 years warranty
• 5 days training for operating personnel included
• Local installation and training from factory trained engineers